GoLink Floor
Home
Products
Solutions
Resources
Contacts
…
Home/Engineered Wood Flooring Quality Control
Quality control

Quality Control for Your Flooring Order

From hand-sorted veneers and thickness checks to cold pressing, profiling and coating, quality is part of our engineered flooring manufacturing process.

01

Quality starts with the wood and engineered board

We select real hardwood veneers for the visible surface and eucalyptus or birch plywood for the supporting construction. Cross-oriented plywood layers form the multi-layer base beneath the chosen species.

Our manufacturing process connects veneer grading, thickness checks, moisture balancing, bonding, surface preparation, profiling and coating. The approved product specification defines the floor required for your order.

02

Veneer grading and moisture balancing

Experienced staff hand-sort kiln-dried oak veneers into A, B, C and D appearance grades and check their thickness against the grading requirements. Grain, knots, colour variation and repair character belong in the accepted sample range.

Sorted veneers and the required plywood pass through a seven-day moisture-balancing stage. This is one manufacturing step; it is not a fixed lead time for a flooring order.

03

Bonding, even thickness and accurate joints

Franklin REACTITE EP921 adhesive is used to cold-press oak veneer to plywood. Sanding produces an even board thickness before the profiling stage.

HOMAG machinery forms the tongue-and-groove profile and micro-bevel. Width, length, total thickness, veneer and joint details are identified in the selected product specification.

04

Surface repairs, texture and finish

Eight shades of epoxy resin are used for surface repairs to knots and cracks. Wire brushing highlights the grain, while handcraft and colour treatments give the product its chosen character.

Treffert lacquer and WOCA natural oil are part of our finishing offer. Colour, texture, sheen, coating and natural variation are checked against the agreed product and representative physical samples.

05

Protection and identification before shipment

Paper cartons, transparent plastic film and palletisation protect the flooring during shipping and storage. Product labels and packing information keep the goods connected to the order.

Branded carton artwork is approved separately from the flooring sample. The packing record also identifies the required quantities and destination information.

06

Standards and reports with the right product scope

Our product literature presents FSC, JAS and CE, and plywood manufactured to E0 and F4 standards. It also states a Cfl-s1 fire rating under EN 13501-1; selected collection descriptions list a P3 slip test.

Ask for the applicable certificates, declarations and test reports for your selected construction and coating. Product coverage, test conditions and document validity should be reviewed for the destination market.

07

Inspection requirements for the actual order

Buyer-specific and independent inspection arrangements are agreed with the product, quantity and production schedule. Define the checks, acceptance criteria, sampling and reporting route before production release.

The specification identifies dimensional and construction requirements; the approved sample identifies appearance. Required performance claims use the relevant product reports rather than an illustrative image.

Illustrative engineered wood flooring material or workflow
08

Warranty information and a clear review record

GoLink planks, chevron and herringbone floors come with a 25-year warranty. Obtain the applicable written warranty terms with your product documents.

If a concern arises, connect the observation to the supplied goods and the approved reference. Keep photographs and the relevant product, packing and site records.

  • Order, product code and available carton or batch references.
  • Description of the concern, affected quantity and date noticed.
  • Photographs and relevant installation, heating or maintenance records.
  • Agreed next steps and the responsible contact.
Manufacturing and product support

Plan the next part of your flooring order.

01

Wood Grade and Appearance

Define a representative range of grain, knots and tone for the flooring we manufacture.

Explore wood grade and appearance
02

Engineered Flooring Construction

Explore hardwood veneers over multi-layer eucalyptus or birch plywood, with product-specific joint options.

Explore engineered flooring construction
03

Discuss a Manufacturing Visit

Arrange a visit to our Deqing manufacturing headquarters and flooring sample room.

Explore discuss a manufacturing visit
04

Support After Delivery

Find 25-year warranty information and prepare the product records for an after-sales enquiry.

Explore support after delivery
Manufacturing & buyer resources

Handbook and working checklists

Download the manufacturing handbook and sample and order checklists directly. These cooperation tools are separate from product-specific technical sheets and supporting reports.

Engineered Flooring Manufacturing & OEM Handbook · PDF · v1.2PDF ↓
Manufacturing and product support

Certificates and product test reports

01

Product Documents and Reports

Review FSC, JAS and CE information, product standards and reports for the selected flooring.

Explore product documents and reports
Discuss your manufacturing programme

Request a Quote for Your Flooring Range

Share your product direction, estimated quantity, target market and packing requirements. We will review the brief for wholesale or OEM / private-label production.

Request a Quote

Documents for your buying decision

Check the evidence for the floor you are ordering.

Our brochure references FSC, JAS and CE. Request available records for your selected construction, finish and destination, and review their holder, validity and scope before relying on a claim.

  • Product specification and approved appearance reference
  • Applicable certificates or test reports, including product coverage
  • Inspection requirements, packing records and written warranty terms
Certification and report scopeQuality controlAfter-sales and warranty

Brochure references do not mean every product carries the same certification. The brochure states a 25-year warranty for planks, herringbone and chevron; obtain the applicable written terms for your product and order.

Frequently asked questions

Questions about quality review

Connect appearance approval and manufacturing checks to the flooring you order.

What is checked when oak veneers are graded?

Our team hand-sorts kiln-dried oak veneers using A, B, C and D appearance grades and checks veneer thickness. Samples should show the accepted grain, knots, filling and colour range. The agreed appearance description explains what your selected grade means for the order, rather than relying on a grade letter alone.

How do you separate an appearance issue from a dimensional requirement?

The approved physical samples describe colour, texture, sheen and the accepted natural variation. The written specification records dimensions, veneer, plywood, profile and other technical requirements. Use the relevant reference for each check and retain the product or batch identity so a reported difference relates to the goods actually supplied.

Can we arrange buyer-specific or independent inspection?

Include the requested inspection scope when discussing the order. Checks, acceptance criteria, sampling, timing and reporting responsibilities need agreement against the selected product and production schedule. Raise any independent inspection or required product testing early so it forms part of the accepted manufacturing and delivery plan.

Which records help when a quality question arises after receipt?

Retain the order and product reference, carton or batch labels, approved sample and specification version. Photograph the concern and record the affected quantity and when it was noticed. Installation, storage or care information may also be relevant. These details help our team review the observation against the correct product records.

Stay in the know

Engineered flooring. OEM ideas.

Product directions and manufacturing insights for importers, distributors and flooring brands.

Preview only: no subscription is created here. Privacy policy

GoLink Floor home

China-based engineered wood flooring manufacturer since 1996, serving importers, wholesalers and flooring brands. Custom development and OEM / private-label options.

About our business

Manufactured for your market.

Company

About GoLinkManufacturingQuality controlMaterials & responsibilityPlan a factory visitCertifications & reportsOur team & responsibilities

Solutions

OEM & private labelWholesale & distributionProject supportApplicationsTrims & accessoriesIndustry solutions

Resources

Guides & downloadsHow to orderRequest samplesAfter-sales supportFAQManufacturing buying support
+86 158 5729 0101[email protected]

No. 238 Beihu Street, Wukang Town, Deqing County, Zhejiang, China

Contact our manufacturing team

AI-created imagery illustrates materials, applications and workflow. Confirm product colour and construction with an approved sample.

GoLink Floor © 2026. All rights reserved.

PrivacyTerms